
ESC ; reverse 1 returns printer to Lower-case &
upper-case mode
ESC 1 reverse 1 prints graphic shown on key V
(this graphic is normally produced in graphics mode by
control-C)
ESC 2 reverse 2 prints graphic shown on key 2
ESC 3 reverse 3 prints chr$(223), text mode
version. See page 117 in your gray manual.
ESC 4 reverse 4 prints graphic shown on key 4
ESC 5
reverse 5 prints graphic shown on key 5
ESC 6 reverse 6 prints graphic shown on key 6,
only after ESC >
ESC 7
reverse 7 prints graphic shown on key N
ESC 8
reverse 8 prints graphic shown on key 8
ESC 9 reverse 9 prints graphic shown on keypad’s
/ key
ESCO
reverse 0 prints graphic shown on key 0
NOTE: The following sequences are left undefined:
ESC <
ESC : If you attempt to use them a reverse @ (at sign) is
ESC , displayed. This is meant to remind you to delete it
ESC !
ESC &
In normal SuperScript operation, some of the escape se
quences shown above put a graphic character on the screen.
These have been changed to allow the graphic character to be
printed. Other characters must be printed using the ESC
(numeric) sequence, even though the graphic could be generated
on the screen with CTRL (numeric), because SuperScript would
interpret the occurrence of the actual graphic on the screen as
an instruction to process a shifted-space,, soft-hyphen, or la
beled block. Use CTRL (numeric) for the graphics on the
odd-number keys (1,3,5,7,9) and ESC (numeric) for the graph
ics on the even-number keys (2,4,6,8,0). In the case of 3, 5,
and 7, either CTRL or ESC will work.
When using ESC ’ (apostrophe) to force a carriage return
without a line feed, you must adjust the right margin before and
after the line where it occurs. The right margin "count" does
not start over at 1 when a shifted-retum is printed, so you have
to fool SuperScript by telling it you want an extra-long line.
Use the Control key to display and print the other graphics
shown on the other NON-ALPHABETICAL keys. As always,
the 4023 printer does not print every graphic correctly, so print
out a trial version of any document you compose using graphics
and check it carefully. In some cases, the graphic printed
depends on whether is was created with or without the shift key
and whether or not the printer is in graphics mode at the time it
is output. The keypad’s decimal point key will even generate 3
different graphics, depending on the circumstances!
The graphics characters on the alphabetic keys will not be
shown on the screen, but will be printed out as graphics, if you
use the ESC > function. All subsequent capitalized (shifted)
alphabetic letters on the same line (up until ESC ; or until the
end of the line) will be printed out as the corresponding graphic
character, while all lower-case letters will be printed out as
capitals. To get a lower-case letter after an alphabetical key
graphic, use ESC ; to switch the printer back into its normal text
mode printing.
Remember that graphics printing will not continue on the
next line unless you use ESC > again. SuperScript sends a
control-q, chr$(17) or cursor-down, to the printer at the begin
ning of each line, forcing it out of graphics mode.
Existing SuperScript files should be used with caution,
especially if they use reverse-field or enhanced printing. There
may be some as yet undiscovered side-effects with this program.
If you intend to use the graphics option of choosing the Epson
printer at the startup menu, even though you are using a 4023
printer, you should avoid this program as there seem to be some
definite side-effects on printing.
Use the new chart included in this report if you have trouble
finding the right combination of keys to produce a desired
graphic. First, find the graphic you want to use in the gray
manual, page 117. Note the number identified with it in the
CHR$ column. Then find that number in the left column of this
chart, and press the keys it tells you. When use of the control
key is called for, you must hold down the control key while
pressing the next key; don’t let it up too soon! Use the keys on
the keypad only when it specifically tells you to use them instead
of the same key on the main keyboard.
The first part of the chart shows the keystrokes you can use
when the printer is in its lower-case mode.
The second part of the chart shows the keystrokes you can
use for the graphics that can be produced only when the printer
is in its graphics mode. The sequence ESC > is in parenthesis
to remind you that the printer must be in graphics mode. Do
not key in the parentheses! You do not necessarily have to key
in the ESC > sequence if you are using several of these graphics
together. Once you have set the printer to the graphics mode, it
will stay there until you reset it to lower-case, or until the end
of the print line, WHICHEVER COMES FIRST. "You will have
to use ESC ; after these graphics to get back to lower-case mode
on the same line, where you need to be for printing graphics
shown in the first part of this chart, or for text.
Remember, SuperScript will command the printer to use its
lower-case mode at the beginning of every print line, so choose
your margins carefully. If you have a print right-margin of less
than 80, AND you key in ESC > once followed by several of
these graphics, AND the printer reaches that right-margin in the
middle of these graphics, the ones that are forced to a new line
will not be printed as the graphics you want because the printer
is forced into lower-case mode at the start of the new line.
************************************* *******
91 control keypad 3
92 escape $ (escape shift 4)
93 see below
94 pi
95 control left-arrow
161 control 1
162 escape 2
163 control 3
164 escape 4
165 control 5
166 control pi
167 see below
168 control ’
12
Northwest Computer News
Kommentare zu diesen Handbüchern